SilencerCo Hybrid 46M

SILENCERCO HYBRID 46M SUPPRESSOR - MODULAR MULTI-CALIBER SILENCER, 9mm THROUGH .460 WEATHERBY MAGNUM

The SilencerCo Hybrid 46M is a modular, fully welded suppressor built to cover nearly every centerfire caliber you own. It handles pistol cartridges from 9mm to .45 ACP, rifle calibers from 5.56 NATO to .338 Lapua Magnum, and big-bore rounds like .45-70 Govt, .458 SOCOM, .450 Bushmaster, and up to .460 Weatherby Magnum. If it's centerfire and .46 caliber or smaller, the Hybrid 46M is rated for it, and both the short and long configurations are full-auto rated.

The 46M uses a removable front module that lets you run it in two configurations. In the long setup, it measures 7.72 inches and weighs 14.9 ounces. Remove the front module and it drops to 5.78 inches and 12.2 ounces. The construction is titanium, Inconel, and 17-4 heat-treated stainless steel with a high-temp Cerakote finish, so it can handle sustained fire and high-pressure magnum loads. 

The Hybrid 46M uses SilencerCo's Charlie mounting system, the same platform shared by the Saker series, Chimera 300, Omega 36M, Velos LBP, and Saker 556K. It ships with a Charlie ASR mount for quick-detach capability and can be adapted with direct thread mounts, piston/booster assemblies, 3-lug mounts, and a wide range of Charlie front caps. Swapping front caps to match your caliber, such as 5.56, 6mm, 7.62, or .46, improves suppression by reducing bore-to-bullet gap.

CAPITOL ARMORY'S OPINION

The Hybrid 46M is one of the most versatile suppressors we have encountered. The front caps, mounting system, and length can all be adjusted to suit the user's needs. The caliber range is broad, and it performs well across all of them. Using different front caps allows smaller projectiles like 5.56, .204, or 6mm to perform well from a .46 caliber bore. There are three categories where the Hybrid 46M stands out. The first is multi-caliber use, since it can cover a wide range of firearms under one stamp. Second, it handles larger rifle rounds well, including .45-70, .458 SOCOM, .450 Bushmaster, and .45 Long Colt. Third, it performs well on .45-caliber subguns and pistol-caliber carbines. It was among the best-sounding suppressors we've run on a Kriss Vector in .45 ACP. One thing to be aware of: the Hybrid 46M uses Charlie-threaded mounts, not the industry-standard HUB (1.375x24) thread found on Bravo-series suppressors. If you already have Bravo/HUB muzzle devices, they will not work on the 46M. Plan your mount purchases accordingly.

FEATURES

• Modular two-piece design configurable in short (5.78") or long (7.72") length
• Full-auto rated in both short and long configurations
• Rated for centerfire pistol calibers from 9mm to .45 ACP and 10mm
• Rated for centerfire rifle calibers from 5.56 NATO to .338 Lapua Magnum
• Rated for big-bore cartridges including .45-70 Govt, .450 Bushmaster, .458 SOCOM, and up to .460 Weatherby Magnum
• Weight: 14.9 oz (long) / 12.2 oz (short), without mount
• Diameter: 1.57"
• Titanium, Inconel, and 17-4 heat-treated stainless steel construction
• Stellite blast baffle for durability under sustained fire
• High-temp Cerakote finish
• Charlie mounting system, Charlie ASR mount included
• Interchangeable front caps for caliber-specific bore optimization
• SilencerCo lifetime warranty

WHAT'S INCLUDED

• Charlie ASR mount
• .46 caliber flat front cap
• Charlie Multitool
• Charlie Basic Spanner Wrench
• Owner's manual

COMPATIBILITY

• Charlie Mounts: Charlie ASR Mount, Trifecta Mount, YHM Mount, 51t Mount, Charlie Direct Thread, Dead Air Key-Mo, Plan-B by Q, Charlie Booster Assembly
• Front Caps: Charlie flat front caps, Charlie flash hider front cap, Charlie standoff front cap
• Muzzle Devices: ASR flash hider, ASR muzzle brake, ASR single port brake
• SilencerCo 3-Lug Mount

VIDEOS

• Hybrid 46M Overview

BARREL RESTRICTIONS

• 10" : 5.56/.223
• 16" : .308/7.62 NATO, .45-70, .458 SOCOM
• 18" : magnum calibers up to .338 Lapua Magnum