Otter Creek Labs Infinity

OTTER CREEK LABS INFINITY 7.62 SUPPRESSOR - MULTI-CALIBER RIFLE SILENCER, 5.56 THROUGH 7.62MM

The Otter Creek Labs Infinity is a 7.62 suppressor built from DMLS 3D-printed Inconel 718, covering calibers from 5.56 and 6mm through 6.5mm, 7mm, 7.62mm, and subsonic 300 Blackout. At 6.5 inches and 20 ounces without a mount, the Infinity uses a four-chamber design with three interchangeable end caps to dial in backpressure for your specific host platform. The rear is threaded 1.375x24 HUB, compatible with virtually every quick-detach and direct-thread mounting system on the market. The Infinity is full-auto rated with no barrel length restrictions on magazine-fed firearms, and belt-fed capable up to 300 rounds continuous on 5.56 or 200 rounds on 7.62 before cooldown. If you are looking for a precision-manufactured, backpressure-adjustable multi-caliber suppressor built from aerospace alloy, the Infinity is the can. 

The three included end caps give you control over how the Infinity interacts with your host. The solid 5.56 cap maximizes sound suppression for 5.56 rifles and 6mm/243 bolt guns. The vented 7.62 cap dumps the most gas, making it the right choice for notoriously gas-sensitive platforms like the MCX, SCAR, AR-10, Tavor, AK, and overgassed AR-15 builds. The solid 7.62 cap splits the difference, covering standard 5.56 rifles, larger bolt guns in 6.5mm through 7.62mm, and subsonic 300 Blackout. A vented 5.56 cap is also available separately for edge cases that fall between the included settings. 

CAPITOL ARMORY'S OPINION

Most suppressors give you one fixed setup and call it done. The Infinity takes a different approach.  It is made from DMLS 3D-printed Inconel 718, features a four-chamber low-backpressure design, with a swappable endcap system tops it off. That last part matters more than many realize. Running a suppressor on a gas-sensitive platform without accounting for backpressure is how you end up with reliability issues and a face full of carbon. The Infinity gives you three calibrated settings out of the box and a fourth available separately. The 1.375x24 HUB mounting solution lets shoots utilize nearly any popular mounting system based on their needs. If you are running a suppressor across multiple platforms and need backpressure flexibility without buying multiple cans, the Infinity is here. 

FEATURES

• DMLS 3D-printed Inconel 718 body
• Four-chamber low-backpressure design
• Three interchangeable end caps included (solid 5.56, solid 7.62, vented 7.62)
• Vented 5.56 end cap available separately
• 1.375x24 HUB rear threads
• Full-auto rated, no barrel length restrictions on magazine-fed hosts
• Belt-fed capable (300 rds continuous on 5.56 / 200 rds on 7.62 before cooldown)
• Cerakote finish
• H900 17-4 stainless steel end caps
• Caliber: 7.62 bore (5.56, 6mm, 6.5mm, 7mm, 7.62mm, 300 BLK subsonic)
• Length: 6.5" (without mount)
• Diameter: 1.75"
• Weight: 20 oz (without mount)

WHAT'S INCLUDED

• Suppressor
• 3 end caps (solid 5.56, solid 7.62, vented 7.62)
• End cap wrench
• Tube clamp
• Owner's manual

COMPATIBILITY

• HUB Direct Thread Mounts: Dead Air, SilencerCo, Energetic Armament, YHM
• SilencerCo Bravo ASR
• Plan-B by Q (Bravo / Omega)
• Dead Air KeyMo (Bravo / Omega), Xeno
• EA TBAC Adapter
• Griffin A2 Adapter
• YHM Kurz QD Adapter, Phantom QD Adapter