Daniel Defense MK18 SBR
Capitol Armory is licensed in all suppressor-friendly states. Form 4 or 4473? Read 4473 vs. Form 4 . Your choice during checkout. See how SBRs direct to your door works or choose to send to your local dealer.
Under ATF's October 9 policy, you can buy a SBR on a 4473 in some states. We still recommend a Form 4: it stays compliant if the policy changes, and ATF approvals come back in days.
DANIEL DEFENSE MK18 SBR - 10.3" 5.56 AR-15 SHORT BARREL RIFLE
The Daniel Defense MK18 SBR is a 5.56mm NATO AR-15 style short barrel rifle built around a 10.3" cold hammer forged Government profile barrel with a carbine-length gas system. It's the same barrel length used on the MK18 upper for CQB work. The rifle weighs 5.88 lbs and measures 26.75" to 29.875" overall with the muzzle device.
The Daniel Defense MK18 RIS II Picatinny quad rail sits up front. USSOCOM has used the RIS II in its SOPMOD Block II program since 2006. Its Bolt-Up System free floats the barrel, and three low profile Santoprene rail ladders, heat resistant to 300° F, cover the rail where you don't need accessories.
The independently ambidextrous GRIP-N-RIP Charging Handle and ambi safety selector work for left- and right-handed shooters, and the enhanced flared magazine well helps guide magazines in. It comes with the Daniel Defense Buttstock and Pistol Grip. At the muzzle, the Daniel Defense Flash Suppressor threads onto a standard 1/2x28 barrel thread. It's available in Black, Black with an FDE rail, and Mil Spec+.
Want M-LOK and a fully ambidextrous lower with the same 10.3" barrel? Look at the MK18 RIII. The MK18 Pistol uses the same 10.3" barrel and RIS II rail with an SBA3 brace, and it isn't an NFA item. Compare the models in our Daniel Defense buying guide.
CAPITOL ARMORY'S TAKE
The MK18 SBR is the Daniel Defense MK18 built around the RIS II quad rail. If you want Picatinny on all four sides for lights, lasers and grips, this is the version to look at, and the 10.3" barrel keeps the rifle short and easy to maneuver. PEW Science builds its standard 10.3" suppressor test host on a factory Daniel Defense MK18 upper, so when you read a PEW Science result on the 10.3" MK18 host, it was shot through a Daniel Defense barrel.
It's also a natural suppressor host. Remove the flash suppressor and the 1/2x28 threads accept the mount for any of the short 5.56 suppressors in the Compatibility section below. If it's out of stock, sign up for the back-in-stock email above, or call us at 512-879-1068 to pre-order one. We'll guarantee you one from the next shipment.
FEATURES
- Cold hammer forged, chrome lined Government profile barrel, mil-spec heavy phosphate coated and HP/MPI tested
- Carbine-length direct impingement gas system with a pinned low profile gas block
- Daniel Defense MK18 RIS II Picatinny quad rail with the Bolt-Up System, free floating the barrel
- Three low profile Santoprene rail ladders, heat resistant to 300° F
- Daniel Defense Flash Suppressor, removable for a suppressor mount
- Mil-spec upper receiver with indexing marks and M4 feed ramps
- Mil-spec lower receiver with an enhanced flared magazine well and rear receiver QD swivel attachment point
- Ambidextrous safety selector
- Independently ambidextrous GRIP-N-RIP Charging Handle
- M16 profile bolt carrier group, MP tested, chrome lined, properly staked gas key
- H buffer
- Daniel Defense Buttstock with nonslip cheek weld, interchangeable butt pads and integral QD point
- Daniel Defense Pistol Grip
- NFA-regulated short barrel rifle (purchasers must be 21 or older)
- Sights sold separately
SPECIFICATIONS
- Caliber: 5.56mm NATO
- Barrel: 10.3", chrome moly vanadium steel, 1:7 twist
- Gas system: Carbine length
- Overall length: 26.75" to 29.875" (with muzzle device)
- Weight: 5.88 lbs
- Muzzle thread: 1/2x28
- Rail: Daniel Defense MK18 RIS II, 6061-T6 aluminum, Type III hard coat anodized
- Upper and lower receivers: 7075-T6 aluminum, Type III hard coat anodized
- Gas block: 4140 hardened steel
- Flash suppressor: 17-4 PH stainless steel, salt bath nitride
- Receiver extension: 6-position, mil-spec 7075-T6 aluminum
- Buttstock and pistol grip: glass filled polymer with soft touch overmolding
- Magazine: 32-round DD Magazine
- Model numbers: 02-088-07327 (Black), 02-088-17024 (Black with FDE rail), 02-088-15028-011 (Mil Spec+)
WHAT'S INCLUDED
- Daniel Defense MK18 SBR
- 32-round DD Magazine
- Daniel Defense Full-Latch Impact Plastic Case
COMPATIBILITY
- Compatible Suppressors: CAT ST, Dead Air Sierra 5, HUXWRX FLOW 556K, SilencerCo Velos LBP 556K, SureFire SOCOM556-MINI4
AVAILABLE MODELS
- Colors: Black, Black with FDE rail, Mil Spec+
| Weight | 5lb 14oz |
|---|---|
| Manufacturer | Daniel Defense |
| Caliber | 5.56mm |
| Action | Semi-Auto; Closed bolt |
| Barrel | 10.3 |
| Length | 26.75 - 30 |
| Thread Pitch | 1/2x28 |
| Magazine | x1 Daniel Defense magazine |
| Finish | Cerakote |
| Warranty | Lifetime |
