Magco EDS-30S
Capitol Armory is licensed in all suppressor-friendly states. Form 4 or 4473? Read 4473 vs. Form 4 Suppressors. Your choice during checkout. See how suppressors direct to your door works or choose to send to your local dealer.
Under ATF's October 9 policy, you can buy a suppressor on a 4473 in some states. We still recommend a Form 4: it stays compliant if the policy changes, and ATF approvals come back in days.
MAGCO ARMS EDS-30S SUPPRESSOR - COMPACT, FULL-AUTO RATED, 5.56 NATO TO 300 WIN MAG
The Magco Arms EDS-30S is a compact, full-auto rated .30 caliber rifle suppressor machined from 17-4 stainless steel and heat treated to H900. It measures 6.625" long and weighs 13.5 oz without a mount, with a 1.6" diameter, and every unit is laser welded around Magco's patent-pending design. Magco rates the EDS-30S for 5.56 NATO, .308 Winchester, 300 BLK, and 300 Win Mag, so one silencer can move between AR-15 calibers and full-power .30 caliber rifles.
At the rear, a HUB (1.375x24) interface accepts HUB-compatible mounts from a wide range of manufacturers. A 17-4 stainless steel 5/8x24 direct-thread mount comes in the box, weighing 1.3 oz and adding .25" of length. Magco also welded a 3/8" hex interface into the end cap, which gives you a way to get a wrench on the can if a HUB mount ever gets stuck.
With a 5" minimum for subsonic 300 BLK and 7" for supersonic, the EDS-30S works on 300 BLK short barrel rifles, while 300 Win Mag requires a barrel of at least 20". In Magco Arms' EDS line, the 30S sits between the 5.25" EDS-30K and the 7 7/8" EDS-30L, and the line also includes the EDS-30XL.
CAPITOL ARMORY'S OPINION
Magco Arms hasn't been around long enough to coast on its name, and we think that works in your favor. They had to get the basics right from day one. 17-4 stainless steel heat treated to H900 and a fully laser-welded build are things you'd expect from higher-end cans, and you don't usually see them at this price.
What we like most about the EDS-30S is the balance. It's small enough to keep your rifles handy but still big enough to do real suppression work, which makes it a great pick for the one can you move between multiple host rifles. The HUB mount helps there too, because if you already run a HUB-compatible system, you don't have to buy into a whole new setup to add this one to the lineup.
We're also big fans of the unique raw finish, since you don't see that look on many silencers out there. And if you want something even quieter and don't mind a little more length, take a look at the EDS-30L.
FEATURES
- Length: 6.625" (without mount)
- Weight: 13.5 oz (without mount)
- Mount: HUB (1.375x24)
- Caliber rating: 5.56 NATO, .308 Winchester, 300 BLK, 300 Win Mag
- Full-auto rated
- Color: Raw
- Diameter: 1.6"
- Material: 17-4 stainless steel, heat treated to H900
- Laser-welded construction
- Welded end cap with 3/8" hex interface for removing a stuck mount
- Patent-pending design
- Ships with a 17-4 stainless steel 5/8x24 direct-thread mount (1.3 oz, adds .25" in length)
WHAT'S INCLUDED
- Magco Arms EDS-30S suppressor
- 5/8x24 direct-thread mount (17-4 stainless steel)
COMPATIBILITY
- Compatible Mounts: Any HUB-compatible mount
BARREL RESTRICTIONS
- 5" : 300 BLK (subsonic)
- 7" : 300 BLK (supersonic)
- 10.5" : 5.56 NATO
- 14.5" : .308 Winchester
- 20" : 300 Win Mag
| Weight | 13.5oz |
|---|---|
| Manufacturer | Magco Arms |
| Caliber | 7.62mm |
| Length | 6.625 |
| Diameter | 1.6" |
| Decibel Reduction / Output | Not Provided |
| Full Auto Rated | Yes |
| Mount | HUB/Bravo - 1.375x24 |
| Color | Raw / Naked |
| Materials | 17-4 Stainless |
| Can Be Disassembled | No |
