Unknown OG 30 L
Capitol Armory is licensed in all suppressor-friendly states. Form 4 or 4473? Read 4473 vs. Form 4 Suppressors. Your choice during checkout. See how suppressors direct to your door works or choose to send to your local dealer.
Under ATF's October 9 policy, you can buy a suppressor on a 4473 in some states. We still recommend a Form 4: it stays compliant if the policy changes, and ATF approvals come back in days.
UNKNOWN SUPPRESSORS OG 30 L SUPPRESSOR - OVER-THE-BARREL .30 CALIBER HUNTING SILENCER
The Unknown Suppressors OG 30 L is an over-the-barrel .30 caliber hunting suppressor, 3D printed as one monolithic piece of titanium. It measures 8" overall, with 4" extending past the muzzle and the other 4" sitting back over the barrel. The OG 30 L weighs 10 oz, has a 1.625" outside diameter, and mounts via 5/8-24 direct thread. Unknown Suppressors rates it at 131.1 dBA on .308 Winchester with M933 ammo.
What separates the OG 30 L from the rest of the OG family is barrel fit. Its 1.00" reflex ID lets it slide over barrels up to 1.00" in outside diameter, so it works on a wide variety of rifles, including larger-profile hunting barrels that are too thick for a standard over-the-barrel can. Measure your barrel's outside diameter where the suppressor will sit before ordering.
If your barrel measures 0.750" or less, the Unknown Suppressors OG 30 offers the same over-the-barrel layout at a lighter weight. Capitol Armory also carries the OG 6-S, the OG 6.5, and the Reaper.
CAPITOL ARMORY'S OPINION
The OG 30 L takes the over-the-barrel idea behind the OG 30 and opens it up to bigger barrels. Plenty of hunting rifles wear contours too thick for the OG 30's 0.750" limit, and the OG 30 L's 1.00" capacity brings those rifles into the mix. If your barrel was too fat for the OG 30, this is the one to look at.
The layout is still the reason to buy it. With half of its 8" length sitting back over the barrel, it only adds 4" past the muzzle, and more of its 10 oz stays closer to your hands instead of hanging off the end. On a rifle you're carrying all day, that matters. Unknown Suppressors also prints it as one monolithic piece of titanium, which they call the strongest can they can make.
Before you order, grab a set of calipers and check your barrel. Anything up to 1.00" in outside diameter will work, and if yours comes in at 0.750" or under, the lighter OG 30 is worth a look too.
FEATURES
- Length: 8" overall (4" past the muzzle, 4" over the barrel)
- Weight: 10 oz
- Mount: 5/8-24 direct thread
- Caliber rating: .30 caliber (7.62)
- Color: Black
- Diameter: 1.625"
- 1.00" reflex ID fits barrels up to 1.00" in outside diameter
- 3D printed as one monolithic piece of titanium
- 131.1 dBA on .308 Winchester with M933 ammo (Unknown Suppressors)
WHAT'S INCLUDED
- Unknown Suppressors OG 30 L suppressor
COMPATIBILITY
- Mount: 5/8-24 direct thread hosts
- Barrel Diameter: Fits barrels up to 1.00" in outside diameter
SOUND PERFORMANCE
- .308 Winchester: 131.1 dBA with M933 ammo (Unknown Suppressors)
| Weight | 10oz |
|---|---|
| Manufacturer | Unknown Suppressors |
| Caliber | 7.62mm |
| Length | 8.0" |
| Diameter | 1.625" |
| Decibel Reduction / Output | Sound: 131.1 dBA (.308 M933) |
| Full Auto Rated | No |
| Mount | Direct Connect / Thread On |
| Thread Pitch | 5/8x24 |
| Color | Black |
| Finish | Cerakote |
| Materials | Grade 23 Ti |
| Can Be Disassembled | No |
| Warranty | Lifetime |