Unknown OG 30

UNKNOWN SUPPRESSORS OG 30 SUPPRESSOR - LIGHTWEIGHT MONOLITHIC TITANIUM .30 CALIBER RIFLE SILENCER

The Unknown Suppressors OG 30 is a lightweight .30 caliber rifle suppressor machined from a single piece of 3D-printed Grade 23 titanium, with zero welds and zero seams anywhere in the construction. At 8.6 ounces and 8 inches overall, with 4 inches of that over the barrel, the OG 30 is a full 2.3 ounces lighter than the original OG while bringing the report down to 130 dB at the shooter's ear. It mounts via 5/8-24 direct thread and is finished in high-temperature black Cerakote. Built and QC'd in Post Falls, Idaho, the OG 30 is the refined version of the suppressor that started the Unknown Suppressors lineup. 

CAPITOL ARMORY'S OPINION

The original OG built Unknown Suppressors' name, and the OG 30 is what happens when that design gets a second pass with better tooling. Cutting 2.3 ounces without changing the over-the-barrel geometry matters more than the spec sheet makes it look. That geometry is what keeps the rifle balanced instead of letting the muzzle dive, and a lot of manufacturers sacrifice it to hit a lighter weight number. Unknown Suppressors kept the profile and just built it lighter. Printing the OG 30 as a single piece of Grade 23 titanium is important. No traditional baffle stacks, no welds, nothing to work loose after repeated firing. At 130 dB at the shooter's ear, the OG 30 keeps the same hollow, low-tone signature the OG line built its name on. If you liked the sound of the original OG, this is that same tone with less weight hanging off your barrel. 

FEATURES

• Caliber: 7.62
• Sound level: 130 dB at the shooter's ear
• Weight: 8.6 oz
• Length: 8" overall, 4" over the barrel
• Diameter: 1.625"
• Mount: 5/8-24 direct thread
• Maximum barrel diameter: 0.750"
• Construction: single-piece 3D-printed Grade 23 titanium
• Finish: high-temperature Black Cerakote

WHAT'S INCLUDED

• Unknown Suppressors OG 30 suppressor

COMPATIBILITY

• 5/8-24 direct thread hosts (native mount)