Thunder Beast Magnus RR
Want to learn more about how easy it is? Read more.
-
Thunder Beast CB Muzzle Brake
$125.00 -
Thunder Beast CB Flash Hider
MSRP $125.00 $120.00
THUNDER BEAST MAGNUS RR SUPPRESSOR
The Thunder Beast Magnus RR is the Reduced Recoil variant of TBAC's full-size Magnus. The RR designation stands for "Reduced Recoil" (also called "Race Ready"). Where the standard Magnus uses a flat endcap, the RR replaces it with an integrated brake at the exit end of the suppressor. On .300 Winchester Magnum, this design reduces recoil by over 60% compared to a bare muzzle. A standard Magnus-CB with a flat endcap reduces recoil by 29% on the same cartridge.
Of all the Magnus RR variants (K-RR, S-RR, and full-size RR), the full-size Magnus RR has the most sound reduction. TBAC positions it as the best RR option for big .30 caliber magnums because it delivers the highest suppression while still achieving the 60%+ recoil reduction. At the TBAC Sound Summit, the Magnus-RR-CB-30 tested as the quietest suppressor in the .300 Win Mag category at 136.1 mil dB average against 61 other suppressors. On .300 WM specifically, measurements showed 137 dB at the muzzle and 135 dB at the shooter's ear. The RR variant is approximately 10 dBA louder at the shooter's ear compared to the standard (non-RR) Magnus. That is the trade-off for the added recoil reduction.
The RR endcap adds 1.5 inches and approximately 2.4 ounces over the standard Magnus, bringing the CB version to 10.5 inches and 17.2 ounces. The all-titanium construction with a 360-degree fully-welded baffle core maintains TBAC's standard for POI (Point of Impact) repeatability. Prone shooters should be aware that the brake ports may create a dust signature, and port orientation matters depending on position.
Three mounting configurations are available for the .30 caliber version. The CB (Compact Brake) uses TBAC's taper mount shared with the Ultra 5, 7, 9, and Dominus-CB. The SR (Secondary Retention) adds a locking ring mechanism and is the only Magnus RR variant rated for full-auto use. The HUB version features a 1.375x24 thread pattern, allowing compatibility with Dead Air Key-Mo, SilencerCo ASR, Q Plan B, Xeno, direct thread, and other third-party mounts. TBAC considers the HUB version intended for advanced users familiar with their chosen mounting system.
For a shorter RR option, the Magnus S-RR at 8.4 inches (CB) provides the highest recoil reduction of the RR lineup by approximately 2%, with suppression between the Ultra 7 (Gen2) and Ultra 9 (Gen2). If recoil reduction is not a priority and you want the absolute quietest Magnus, the standard Magnus is approximately 10 dBA quieter at the ear. For .338 or .375 caliber versions, call us to discuss availability.
CAPITOL ARMORY'S TAKE
The full-size Magnus RR is the can to pick if you want maximum suppression and recoil reduction in the same package. It tested as the quietest .300 WM suppressor at the TBAC Sound Summit, and 60%+ recoil reduction on magnum cartridges makes a real difference for follow-up shots and long sessions. The trade-off is size and weight. At 10.5 inches and 17.2 ounces on the CB, it is a full-size suppressor. If that length is a problem, the S-RR cuts it down to 8.4 inches with marginally better recoil reduction but less sound suppression. Prone shooters should think about the dust signature from the brake ports. The CB version is the simplest and lightest setup. The SR adds full-auto capability and the locking ring, but also adds 0.70 inches and about 2.9 ounces. The HUB is there for shooters already invested in a third-party mount system.
FEATURES
- 360-degree fully-welded titanium baffle core
- Integrated RR (Reduced Recoil) brake endcap
- Most sound reduction of all Magnus RR models
- Ionbond DLC coating on CB and SR series brakes
- Conical shoulder surface on CB and SR mounts
- Consistent POI repeatability
- Full-auto rated (SR version only)
SPECIFICATIONS
- Caliber: .30 cal, up to .300 Norma Magnum
- Material: 100% titanium
- Length: 10.5" (CB/HUB) | 11.2" (SR)
- Diameter: 1.85"
- Weight: 17.2 oz (CB) | 20.1 oz (SR)
- Finish: High-temp Cerakote, Black
- Mount: CB (taper), SR (locking ring), or HUB (1.375x24)
- Recoil reduction: Over 60% on .300 WM vs. bare muzzle
- Sound (.300 WM): 137 dB muzzle / 135 dB shooter's ear
- Full-auto rating (SR only): Lifetime to exceed 10 SURG cycles on 10.5" M4/MK18
- SKU prefix: MAGNUS-RR
MINIMUM BARREL LENGTHS (.30 CAL)
- 5.5" - .300 Blackout (full power and subs), 6.8 SPC, 7.62x39
- 8" - .308 Win, 6.5 Creedmoor, .260 Rem, 6 Creedmoor, .243 Win, .22 Creedmoor, .223/5.56 (semi-auto)
- 10.3" - .223/5.56 (full-auto, per Dominus-SR schedule)
- 12" - 26 Nosler, 6.5 SAUM, 6.5 PRC, 7 WSM, 7 SAUM, 7 STW, 7 RM, .300 WSM
- 14.5" - .300 PRC, .300 RUM, 7 RUM, .300 WM, .300 WBY, 6.5-300 WBY
- 16" - .300 Norma Magnum, 28 Nosler
WHAT'S INCLUDED
- CB - Muzzle device sold separately
- SR - Muzzle device sold separately
- HUB - No mount included
COMPATIBILITY
- CB - CB Muzzle Brake, CB Flash Hider
- SR - SR Muzzle Brake
- HUB - SilencerCo ASR, Dead Air Key-Mo, Dead Air Xeno, Plan B by Q, Direct Thread, Thunder Beast CB Adapter, and more
MODEL OPTIONS
- CB - TBAC's Compact Brake (CB) taper mounting system. Shared with the Ultra 5, 7, 9, and Dominus-CB. Not full-auto rated.
- SR - Secondary Retention (SR) system with locking ring. Full-auto rated. Adds 0.70" length and ~2.9 oz over CB version.
- HUB - 1.375x24 thread pattern. Compatible with any Bravo/Omega/HUB style mounting system. Not full-auto rated. Intended for users familiar with their chosen HUB mount.
| Weight | 1lb 1.2oz |
|---|---|
| Manufacturer | Thunder Beast |
| Caliber | 7.62mm, .338 |
| Length | 10.5 |
| Diameter | 1.8" |
| Decibel Reduction / Output | Not Provided |
| Full Auto Rated | Yes |
| Mount | Quick Disconnect |
| Color | Black |
| Finish | Cerakote |
| Materials | Titanum |
| Can Be Disassembled | No |
| Warranty | Lifetime |
TBAC MAGNUS RR - RACE READY
The Thunder Beast Magnus RR is built for shooters who demand extreme performance without compromise. The RR stands for “Reduced Recoil” or “Race Ready,” and it lives up to both names. Thanks to its optional brake-equipped endcap, recoil can be cut by more than 60 percent with calibers like .300 Win Mag, making it a standout for both PRS competitors and long-range hunters.
The Magnus RR is made entirely from titanium, giving it strength without unnecessary weight. It is designed for precision use, though prone shooters may want to clock the brake ports carefully to avoid a dust signature. Some describe the recoil impulse as more of a push than a sharp snap, which many find easier to manage during follow-up shots.
Three mounting systems are available: CB, SR, and HUB. The CB mount is a lightweight, simple taper design that locks up solid and maintains zero, making it ideal for precision bolt-action rifles. The SR mount builds on the CB by adding a locking collar, allowing for quicker attachment and added security, which is perfect for semi-auto platforms and high-volume shooting. The HUB mount uses the industry-standard 1.375 × 24 thread pattern, making it compatible with popular quick-detach systems like ASR, Key-Mo, Xeno, and Plan B. This option is best for shooters who want maximum flexibility or already run various QD setups.
This TBAC model is one of the quietest and most effective 30-caliber suppressors on the market. It is tailored for shooters who want the best of both worlds: exceptional suppression and recoil reduction, with the durability and consistency Thunder Beast is known for.
FEATURES
- Reduced recoil
- Top-tier decibel reduction
- Multiple mounting styles available (CB/SR/HUB)
- 30 caliber versions are rated up to 300 Norma mag
- Full-auto rated on the "SR" model
- "HUB" utilizes all systems that fit the Bravo/Omega thread pitch
- Black Cerakote finish
WHAT'S INCLUDED
- CB - Optional muzzle device
- SR - Optional muzzle device
- HUB - no mount included
COMPATIBILITY
- CB - CB Muzzle Brake, CB Flash Hider
- SR - SR Muzzle Brake
- HUB - SilencerCo ASR, Dead Air Key-Mo, Dead Air Xeno, Plan B by Q, Direct Thread, Thunder Beast CB, and more!
MODEL OPTIONS
- CB - Features TBAC's Compact Brake (CB) mounting system.
- SR - Full-auto rated and uses TBAC's Secondary Retention (SR) mounting system.
- HUB - Allows use with any "Bravo" or "Omega" style mounting system.


