Huxwrx Flow 556 Ti

HUXWRX FLOW 556 Ti SUPPRESSOR - FLOW-THROUGH TITANIUM 5.56 SILENCER, ZERO BACKPRESSURE, TORQUE LOCK QD MOUNT

The HUXWRX Flow 556 Ti is a fully 3D-printed Grade 5 titanium (6AL-4V) suppressor rated for 5.56 NATO with no barrel length restrictions. At 11.4 ounces and 6.8 inches overall, it uses HUXWRX's flow-through design to direct gas forward and out the front of the suppressor rather than back into the action. HUXWRX testing shows bolt velocity impact of less than 5% over unsuppressed baseline, compared to the 20 to 40% increase common with traditional baffle suppressors on short-barreled 5.56 rifles. No gas system tuning, heavier buffers, or suppressor-specific bolt carriers required. The Torque Lock QD mounting system tightens under fire for a secure attachment. Integrated GeoFlash Cap for flash reduction. C-Series Cerakote finish in Black or FDE. 1/2x28 muzzle device sold separately.

CAPITOL ARMORY'S OPINION

 The backpressure argument for the Flow 556 Ti is more concrete than it is for most suppressors that make similar claims. A less-than-5% bolt velocity increase over baseline is a verifiable spec, and it matters practically for shooters running short-barreled 5.56 hosts. On a 10.3 or 11.5-inch SBR, a conventional suppressor can push bolt carrier velocity high enough that reliable cycling requires an adjustable gas block, a heavier buffer, or both. The Flow 556 Ti removes that from the equation. It runs on a stock-configured rifle without the additional tuning cost or complexity.

At 11.4 ounces, the Flow 556 Ti is light for a full-sized 5.56 suppressor, and the Grade 5 titanium construction backs that weight with real durability. The Torque Lock system is a HUXWRX-proprietary QD mount, so your muzzle device selection is limited to HUXWRX's own flash hider and muzzle brake options. That is worth factoring in if you are already running muzzle devices from another manufacturer on your hosts. If you have a rifle with a dedicated suppressed gas setting, HUXWRX recommends leaving it on the unsuppressed setting when running this suppressor. 

FEATURES

• Flow-through design venting gas forward, less than 5% bolt velocity increase over unsuppressed baseline
• Fully 3D-printed Grade 5 titanium (6AL-4V) construction
• Rated for 5.56 NATO
• No barrel length restrictions
• Full-auto rated
• 11.4 oz, 6.8" overall length, 6.1" added to barrel, 1.8" diameter
• Torque Lock QD mounting system, tightens under fire
• Integrated GeoFlash Cap for flash reduction
• C-Series Cerakote finish, Black or FDE

WHAT'S INCLUDED

• HUXWRX Flow 556 Ti Suppressor
• Multi-Tool
• Instructional Literature
• Sticker
• Note: muzzle device sold separately.

COMPATIBLE MUZZLE DEVICES

• HUXWRX Muzzle Brake QD 556
• HUXWRX Flash Hider QD 556