HUXWRX FLOW 45M

HUXWRX FLOW 45M SUPPRESSOR - MODULAR, FLOW-THROUGH, 9 TO 400 LEGEND

The HUXWRX FLOW 45M is a modular, multi-caliber pistol suppressor fully 3D-printed in Grade 23 Titanium and rated for 9mm, 10mm, .45 ACP, 45 Long Colt, .45-70, .458 SOCOM, and 400 Legend. In its full-length configuration, it measures 8.5" and weighs 7.4 oz, and removing the suppressor module takes it down to a 6.3", 5.4 oz K configuration, both with a 1.375" diameter. HUXWRX calls it the lightest two-piece modular .45 suppressor available, and it is full-auto rated for a magazine-fed .45 ACP platform.

Optimized for .45 ACP, this titanium suppressor is built for handguns, pistol-caliber carbines (PCCs), and rifles chambered in .45 and under. HUXWRX's patented Flow-Through technology redirects gas forward to minimize blowback and reduce shooter exposure to toxins while maintaining the host's natural cycling and reliability.

Every FLOW 45M ships preassembled in its short configuration with a .578x28 piston and booster assembly, which is required on pistols where the barrel moves to cycle. HUXWRX also supports 3-Lug, stiction, and direct thread adapters for other hosts, including the HUXWRX 3-Lug Mount Assembly, the HUXWRX Direct Thread Mount, and additional HUXWRX pistons. For maintenance, Suppressor Sauce is the preferred cleaning solution.

CAPITOL ARMORY'S OPINION

The FLOW 45M sounds great. In the long configuration, it's one of the best-sounding pistol silencers on the market, and in the short configuration it sounds better than most cans in a similar size range. Run it full length when you want maximum suppression, then pull the module for a shorter, lighter setup when size and weight matter more, all without buying a second can.

Pistols are where it's best suited, and that's where most shooters will put it. The lack of blowback is immediately noticeable, and it's great to see HUXWRX's Flow-Through technology on a pistol suppressor. Sending gas forward instead of back at the shooter cuts down on the toxins you're breathing, and it lets the gun keep its natural cycling and reliability. Grade 23 Titanium keeps the weight down, and since the .578x28 booster assembly comes installed, it's ready for a .45 ACP semi-auto pistol out of the box.

It also works great on PCCs and lever guns. 45 Long Colt is impressively quiet through it, and the FLOW 45M on a lever-action rifle is a lot of fun. With ratings that run from 9mm all the way to .458 SOCOM and 400 Legend, one can covers a lot of ground. If this all sounds great, but you're really wanting a dedicated 9mm offering, check out the FLOW 9M.

FEATURES

• Length: 8.5" (full configuration), 6.3" (K configuration)
• Weight: 7.4 oz (full configuration), 5.4 oz (K configuration); 9.7 oz and 7.7 oz with the included booster assembly
• Mount: Ships with .578x28 piston and booster assembly
• 3-Lug and direct thread adapters available
• Caliber rating: 9mm, 10mm, .45 ACP, 45 Long Colt, .45-70, .458 SOCOM, 400 Legend
• Full-auto rated for a magazine-fed .45 ACP platform
• Color: Matte Black, Flat Dark Earth
• Diameter: 1.375"
• Material: Grade 23 Titanium, fully 3D-printed
• Finish: C-Series Cerakote
• Two-piece modular design, full or K configuration
• Patented Flow-Through® technology to minimize blowback
• Length added to barrel with booster: 8.4" (full), 6.2" (K)
• Optimized for .45 ACP

WHAT'S INCLUDED

• HUXWRX FLOW 45M suppressor
• Suppressor module
• External thread protector
• .578-28 piston and booster assembly
• Wrench

COMPATIBILITY

• Mounts: HUXWRX 3-Lug Mount Assembly, HUXWRX Direct Thread Mount, HUXWRX Pistons
• Cleaning: HUXWRX Suppressor Sauce Cleaning Kit, HUXWRX Suppressor Sauce Refill Kit

MEDIA

• Launch Video
• Education Video
• FLOW 45M Manual
• FLOW 45M Spec Sheet
• FLOW 45M Accessory Compatibility Chart

AVAILABLE MODELS

• Colors: Matte Black, Flat Dark Earth