Rugged Sub9
Capitol Armory is licensed in all suppressor-friendly states. Form 4 or 4473? Read 4473 vs. Form 4 Suppressors. Your choice during checkout. See how suppressors direct to your door works or choose to send to your local dealer.
Under ATF's October 9 policy, you can buy a suppressor on a 4473 in some states. We still recommend a Form 4: it stays compliant if the policy changes, and ATF approvals come back in days.
RUGGED SUB9 SUPPRESSOR - BELT FED RATED 9MM PCC AND SUBGUN SILENCER, HUB-COMPATIBLE
The Rugged Sub9 is a Belt Fed Rated 9mm suppressor designed specifically for pistol caliber carbines and subguns. Rugged uses coaxial chambers to keep it as quiet as possible on PCCs and SMG platforms while maintaining low blowback. It stays compact at 6.6" and 11.9 oz without a mount (6.8" and 14.1 oz with the included Rugged Universal 3 Lug Mount), with a 1.73" diameter. The body and baffles are 17-4 stainless steel, the front cap is hard coat anodized aluminum, and the finish is black High Temp Cerakote.
Rugged rates the Sub9 for pistol calibers up to 9mm, plus 357 Magnum, .38 Special, 350 Legend, and subsonic 300 Blackout from an 8" or longer barrel. Rugged also builds it with an Infinitely Rebuildable Receiver and places the serialized engraving over the thickest stainless steel cross section of the suppressor, which allows fast and easy repairs if it's ever damaged.
Out of the box, the Sub9 ships with the Rugged Universal 3 Lug Mount (RU3), which uses a taper lock for a stronger and more concentric lock up than traditional spring style 3 lug mounts and works with all HK Spec 3 Lug adapters. Behind it, the Sub9 uses HUB (1.375x24) threads, so it also runs on the Rugged Universal Mount (R.U.M.), the Rugged Universal Direct Thread Mount, or any other HUB-compatible mount. Just make sure any muzzle device has the appropriate bore diamater to accomodate 9mm projectiles.
Rugged generally points shooters who want maximum suppression on a subgun, PCC, or lever gun to the Sub9, and shooters who want one 9mm can covering both handguns and subguns to the Rugged Obsidian9.
CAPITOL ARMORY'S OPINION
The Sub9 fills a real gap in the PCC and subgun world. A lot of 9mm suppressors are built around handguns first, with carbine performance as an afterthought. Rugged went the other way here and designed the Sub9 around PCCs and subguns from the start, so it's quiet, compact, and keeps the gas out of your face on the guns most people actually put a lot of rounds through.
The RU3 mount is the standout feature for anyone running HK-style 3-lug hosts. The taper lock gives you a stronger, more concentric lockup than the spring-style 3-lug mounts a lot of shooters are used to, and it works with any HK Spec 3 Lug adapter. Since the can itself rides on standard HUB threads, you're not stuck if your setup changes down the road.
It's also built the way you'd expect from Rugged. Being Belt Fed Rated means long strings aren't something you need to worry about, and the stainless body and baffles hold up to the high round counts PCCs and subguns tend to see. The rebuildable receiver is a nice bit of peace of mind, too, if you plan on keeping this can for the long haul.
If you also want a can for your handguns, the Rugged Obsidian9 is the more versatile pick, covering pistols and subguns in one package. The Sub9 is the one to grab when your carbine or subgun is the priority and you want it as quiet as possible.
FEATURES
- Length: 6.6" without mount / 6.8" with RU3
- Weight: 11.9 oz without mount / 14.1 oz with RU3
- Mount: HUB (1.375x24) threads, ships with the Rugged Universal 3 Lug Mount (RU3)
- Caliber rating: Pistol calibers up to 9mm, plus 357 Magnum, .38 Special, 350 Legend, and 300 Blackout (subsonic)
- Belt Fed Rated
- Color: Black
- Diameter: 1.73"
- Materials: 17-4 stainless steel body and baffles, hard coat anodized aluminum front cap
- Finish: High Temp Cerakote
- Coaxial chambers optimized for SMG, PDW, and PCC use, with low blowback
- RU3 taper lock provides a stronger, more concentric lock up than spring style 3 lug mounts
- RU3 compatible with all HK Spec 3 Lug adapters
- Infinitely Rebuildable Receiver
- Serialized engraving over the thickest stainless steel cross section for fast and easy repairs
WHAT'S INCLUDED
- Sub9 suppressor
- Rugged Universal 3 Lug Mount (RU3)
- 9mm front cap
- Sub9 Tools
- Rugged Suppressors sticker
COMPATIBILITY
- Compatible Mounts: Rugged Universal Mount (R.U.M.), Rugged Universal Direct Thread Mount, Any HUB-compatible mount
MEDIA
BARREL RESTRICTIONS
- 8" : 300 Blackout (subsonic only)
- 9mm, 357 Magnum, .38 Special, 350 Legend: No minimum listed by Rugged
| Part Number | SUB9 |
|---|---|
| Weight | 11.9oz |
| Manufacturer | Rugged |
| Caliber | 9mm |
| Length | 6.6 |
| Diameter | 1.75" |
| Decibel Reduction / Output | Not Provided |
| Full Auto Rated | Yes |
| Mount | HUB/Bravo - 1.375x24 |
| Color | Black |
| Finish | Cerakote |
| Materials | 17-4 Stainless Steel |
| Can Be Disassembled | No |
| Warranty | Lifetime |
