Exigent FireCat22
Capitol Armory is licensed in all suppressor-friendly states. Form 4 or 4473? Read 4473 vs. Form 4 Suppressors. Your choice during checkout. See how suppressors direct to your door works or choose to send to your local dealer.
Under ATF's October 9 policy, you can buy a suppressor on a 4473 in some states. We still recommend a Form 4: it stays compliant if the policy changes, and ATF approvals come back in days.
EXIGENT DEFENSE FIRECAT22 SUPPRESSOR - FULL-AUTO RATED INCONEL 718 RIMFIRE SILENCER, .22 TO 5.7X28
The Exigent Defense FireCat22 is a full-auto rated .22 caliber rimfire suppressor printed from Inconel 718 using Direct Metal Laser Sintering (DMLS). It measures 5.0" long and 1.125" in diameter, weighs 6.75 oz, and mounts with integral 1/2x28 threads. Exigent Defense rates the FireCat22 for .22 LR, .22 Magnum, 17 HMR, and FN 5.7x28mm with no barrel length restrictions, along with single-shot 5.56mm on barrels 10.3" and longer.
Because the FireCat22 is printed as a single piece, there are no weld seams or assembly joints to fail. That process also lets Exigent Defense build internal geometry that can't be produced through traditional machining. The baffle architecture is designed around the pressure characteristics of .22 LR and similar cartridges, maximizing dwell time and gas expansion to keep first-round pop to a minimum while reducing back pressure. An internal flash hider cuts flash signature and helps disrupt sound waves. Inconel 718 is a nickel-based superalloy with strong resistance to heat, erosion, and corrosion, so it holds up to long firing schedules and the aggressive cleaning rimfire ammunition tends to demand. The C-102 Graphite Black Cerakote finish adds another layer of protection against heat, abrasion, and corrosion.
Exigent Defense engineered the FireCat22 to withstand full-auto fire, Force Reset Trigger (FRT)-equipped firearms, and higher-pressure calibers like FN 5.7x28mm, which makes it a strong match for hard-running rimfire hosts and 5.7 pistols and carbines. Its 5.56mm rating is limited to single-shot use on barrels 10.3" and longer, so it isn't intended as a 5.56 rifle suppressor. Hosts without a 1/2x28 muzzle can often be set up with one of our thread adapters.
If you're looking for the same printed Inconel 718 construction for a 5.56 rifle, take a look at the Exigent Defense FireTeam 556, or browse the full Exigent Defense suppressor lineup.
CAPITOL ARMORY'S OPINION
If you shoot a lot of .22, you already know how dirty rimfire ammo is and how hard it can be on a suppressor. That's exactly the problem Exigent Defense went after with the FireCat22. The whole can is printed as one piece of Inconel 718, so there are no welds or joints to wear out, and Exigent built it to put up with full-auto fire, FRT-equipped guns, heavy fouling, and aggressive cleaning. For us, that makes it a great pick for the rimfire host that gets run hard and cleaned harder.
We also like that it isn't a .22-only can. The FN 5.7x28mm rating lets it pull double duty on 5.7 pistols and carbines, and at 6.75 oz and 5.0" long, it stays compact enough for rimfire pistols as well as rifles. One thing worth keeping straight is the 5.56 rating, which covers single shots on barrels 10.3" and longer. Think of the FireCat22 as a rimfire and 5.7 suppressor, and leave it off your AR-15.
FEATURES
- Length: 5.0"
- Weight: 6.75 oz
- Mount: Integral 1/2x28 direct thread
- Caliber rating: .22 LR, .22 Magnum, 17 HMR, FN 5.7x28mm, and single-shot 5.56mm (10.3"+ barrels)
- Full-auto rated
- Color: C-102 Graphite Black Cerakote
- Diameter: 1.125"
- Printed from Inconel 718 using Direct Metal Laser Sintering (DMLS)
- One-piece construction with no weld seams or assembly joints
- Engineered to withstand Force Reset Trigger (FRT)-equipped firearms
- Baffle architecture designed for minimal first-round pop and reduced back pressure
- Internal flash hider for reduced flash signature and improved sound wave disruption
- Resistant to heat, erosion, corrosion, heavy fouling, and aggressive cleaning
- Part number: FC22
WHAT'S INCLUDED
- Exigent Defense FireCat22 suppressor
COMPATIBILITY
- Thread Adapters: Walther P22 / S&W M&P22 Adapter, S&W M&P 22 Compact Adapter, Sig Mosquito Thread Adapter, Sig Sauer / GSG 1911 .22 LR Adapter, CMMG FNH PS90 Thread Adapter, All Thread Adapters
- Spacers: Rifle Thread Spacer (1/2x28 Rimfire)
BARREL RESTRICTIONS
- No minimum: .22 LR, .22 Magnum, 17 HMR, FN 5.7x28mm
- 10.3" : 5.56mm (single shot only)
| Part Number | FC22 |
|---|---|
| Weight | 6.75oz |
| Manufacturer | Exigent Defense |
| Caliber | .22 lr |
| Length | 5.0 |
| Diameter | 1.125" |
| Decibel Reduction / Output | Not Provided |
| Full Auto Rated | Yes |
| Mount | Direct Connect / Thread On |
| Color | Black |
| Finish | Cerakote |
| Materials | Inconel 718 |
| Can Be Disassembled | No |
| Warranty | Lifetime |
| Model | Standard |
