Daniel Defense NULL 9Ti
Capitol Armory is licensed in all suppressor-friendly states. Form 4 or 4473? Read 4473 vs. Form 4 Suppressors. Your choice during checkout. See how suppressors direct to your door works or choose to send to your local dealer.
Under ATF's October 9 policy, you can buy a suppressor on a 4473 in some states. We still recommend a Form 4: it stays compliant if the policy changes, and ATF approvals come back in days.
DANIEL DEFENSE NULL 9TI SUPPRESSOR - LIGHTWEIGHT, TITANIUM, MINI-HUB (ALPHA)
The Daniel Defense NULL 9Ti (model 06-140-16309) is a 4.4 oz, weldless, fully 3D-printed titanium suppressor built for 9mm pistol-caliber carbines (PCCs) and other fast-shooting platforms. It measures 5.08" long and 1.41" in diameter, and its high-flow design minimizes back pressure to reduce blowback along with the toxic gases and particulate that reach the shooter. Daniel Defense cites independent testing showing the NULL 9Ti to be over 75 percent quieter than a bare muzzle.
Beyond 9mm, the NULL 9Ti is rated for 300 Blackout (300 BLK). It is full-auto rated for 9mm and 300 BLK subsonic, while 300 BLK supersonic is limited to semi-auto fire on a barrel of 7" or longer. Daniel Defense places no barrel length restriction on 9mm or 300 BLK subsonic, so short carbines and SBRs are fair game.
Mounting is handled by Mini-HUB (1.125x28), also known as Alpha. The NULL 9Ti ships with a 1/2x28 direct thread Mini-HUB mount pre-installed, and it also works with the SilencerCo Alpha ASR Mount, SilencerCo 3-Lug Mount, and Rugged Obsidian mounts. If the Alpha designation is new to you, our SilencerCo Alpha, Bravo & Charlie Mount Guide explains how it fits alongside other common mount sizes.
While PCCs are its focus, the NULL 9Ti can also be used on pistols. It does not use a traditional booster system, so reliability on a pistol depends on the individual combination of host firearm and ammunition.
CAPITOL ARMORY'S OPINION
We see the NULL 9Ti as a PCC can first and foremost. Daniel Defense designed it around gas management, and on a blowback carbine that matters just as much as sound reduction, since less gas coming back means a cleaner gun and a more comfortable range day. At 4.4 oz, it also adds very little weight to the end of a short carbine.
If you already run Alpha mounts, the Mini-HUB interface makes this an easy can to fit into your setup. It will go on a pistol too, but without a traditional booster, plan on testing it with your specific gun and ammo before you count on it.
FEATURES
- Length: 5.08"
- Weight: 4.4 oz
- Mount: Mini-HUB (1.125x28), also known as Alpha
- Caliber rating: 9mm, 300 BLK subsonic, and 300 BLK supersonic (semi-auto only)
- Full-auto rated for 9mm and 300 BLK subsonic
- Color: Clear Type II anodized finish
- Diameter: 1.41"
- Weldless, fully 3D-printed titanium construction
- High-flow design minimizes back pressure and blowback
- Reduces shooter exposure to toxic gases and particulate
- Ships with a 1/2x28 direct thread Mini-HUB mount
- Maximum operating temperature: 750°F
- Model number: 06-140-16309
WHAT'S INCLUDED
- NULL 9Ti suppressor
- 1/2x28 direct thread Mini-HUB (Alpha) mount, pre-installed
COMPATIBILITY
- Compatible Mounts: SilencerCo Alpha Direct Thread Mount, SilencerCo Alpha ASR Mount, SilencerCo 3-Lug Mount, Rugged Obsidian Dual Taper Mount, Rugged Obsidian Fixed Mount
MEDIA
BARREL RESTRICTIONS
- No restriction: 9mm, 300 BLK subsonic
- 7" : 300 BLK supersonic
| Part Number | 06-140-16309 |
|---|---|
| Weight | 4.4oz |
| Manufacturer | Daniel Defense |
| Caliber | 9mm |
| Length | 5.08" |
| Diameter | 1.41" |
| Decibel Reduction / Output | Not Provided |
| Full Auto Rated | Yes |
| Mount | Alpha - 1.125x28 |
| Color | Raw / Naked |
| Finish | Type II Anodized |
| Materials | 3D-printed titanium |
| Can Be Disassembled | No |
| Warranty | Lifetime |
| Model | Standard |
