HUXWRX Ventum 762
Want to learn more about how easy it is? Read more.
-
HuxWrx Alignment Rod
$54.99 -
Huxwrx Flow 762 Ti
MSRP $1,554.00 $1,185.00 -
HUXWRX Flow 556k
$1,054.00
HUB COMPATIBLE FLOW-THROUGH
The HUXWRX Ventum 762 is the first HUB-compatible Flow-Through suppressor from the company that pioneered the technology. It uses the standard HUB (1.375x24) thread pitch, giving shooters access to the widest range of mounting systems on the market while maintaining all the benefits of true Flow-Through design.
Flow-Through technology pushes gases forward and out the front of the suppressor rather than back into the action. The result: less gas in the shooter's face, reduced toxic fume exposure, less component wear, a standard cyclic rate, and improved firearm reliability when suppressed. The Ventum 762 manages all of this in a compact 6.7", 14.5 oz package. And unlike many low-backpressure suppressors that sacrifice muzzle signature for shooter comfort, the Ventum 762 sounds balanced at both the ear and the muzzle.
The Ventum 762 is rated for 5.56 through 300 PRC with no barrel length restrictions, making it a true multi-caliber suppressor. It works across platforms including bolt action, lever action, semi-auto, submachine gun, bullpup, and AK rifles. It ships with a 5/8x24 direct thread adapter that can be swapped in seconds for any HUB-compatible quick-detach mount, including Dead Air KeyMo, Dead Air Xeno, SilencerCo ASR, Q Plan-B, Rugged RUM, and HUXWRX HUB-QD.
Durability is built in. The Ventum 762 passes 6 full cycles of the SOCOM Reliability Stress Test (each cycle is 8 magazines of 30 rounds). It is full-auto rated and designed for professional use. If the core does wear out, the 3D-printed Grade 5 Titanium core is removable and replaceable while the serialized outer tube stays intact. The detachable GeoFlash cap provides front-end serviceability and flash control.
CAPITOL ARMORY'S TAKE
The Ventum 762 is a big deal for anyone who has been interested in HUXWRX Flow-Through technology but didn't want to be locked into proprietary mounts. The HUB thread gives you access to KeyMo, Xeno, ASR, Plan-B, Rugged RUM, and more. You're not locked in, and that matters if you run multiple hosts or plan to change mounting systems down the road.
Flow-Through is a real differentiator for gas gun shooters. If you've ever pulled your face away from the optic because of blowback, you know the problem. The Ventum 762 addresses that without the sound tradeoff that plagued earlier low-backpressure designs. It sounds solid at both the muzzle and the ear, which makes it a practical option for bolt guns too.
At 14.5 ounces without a mount and 6.7" long, it's competitive in size and weight for a multi-caliber 7.62 suppressor. And the replaceable titanium core means this is a suppressor you can maintain long-term without replacing the entire unit.
FEATURES
- Flow-Through design (no excess backpressure)
- HUB (1.375x24) compatible - works with Bravo/Omega mounting systems
- Full-auto rated
- No barrel length restrictions
- Detachable GeoFlash cap
- User-serviceable - replaceable core, serialized outer tube
- Passes 6 cycles of the SOCOM Reliability Stress Test
- +/- 4% bolt velocity
SPECIFICATIONS
- Caliber: 5.56, 6mm, 6.5, 7mm, 7.62, .308, 30-06, 300 WM, 300 PRC
- Weight: 14.5 oz (without mount) / 16.3 oz (with included DT adapter)
- Length: 6.7"
- Diameter: 1.8"
- Length Added to Barrel: 6.36" (with included DT adapter)
- Thread Pitch: 5/8x24 (included DT adapter)
- Mount: HUB (1.375x24)
- Core: 3D-Printed Grade 5 Titanium
- Housing: 17-4 Heat Treated Stainless Steel
- Finish: Black Nitride QPQ
- Maintenance: Detailed cleaning every 2,500 rounds
- Warranty: Limited Lifetime (manufacturing defects)
- SKU: 2237
WHAT'S INCLUDED
- HUXWRX Ventum 762 suppressor
- 5/8x24 direct thread adapter
- Owner's manual
COMPATIBLE ACCESSORIES
The Ventum 762 uses the HUB (1.375x24) thread, which is the same thread pitch used by Bravo/Omega-compatible mounts. The included 5/8x24 direct thread adapter can be removed and replaced with any of the following:
| Weight | 15oz |
|---|---|
| Manufacturer | HUXWRX |
| Caliber | 7.62mm |
| Length | 6.7 |
| Diameter | 1.8" |
| Decibel Reduction / Output | Not Provided |
| Full Auto Rated | Yes |
| Mount | HUB/Bravo - 1.375x24 |
| Thread Pitch | Multiple Thread Pitchs Available |
| Color | Black |
| Finish | Cerakote |
| Materials | Grade 5 Titanium, 17-4 Heat Treated Stainless Steel |
| Can Be Disassembled | No |
| Warranty | Lifetime |
HUB COMPATIBLE FLOW-THROUGH
The Ventum from Huxwrx takes the popular Flow-Through technology and makes it even more user-friendly. On the surface, the most exciting feature for many may be the incorporation of the HUB/Bravo/Omega mounting thread pitch. While that is certainly worthy of headline news, the Ventum has much, much more to offer.
Huxwrx pioneered Flow-Through silencers, designed so gasses are pushed forward and there is no excess backpressure. This allows for a silencer that's quieter at the ear, prevents toxic gasses from being forced into the shooter's face, reduces component wear, maintains a normal cyclic rate, and increases firearm reliability when suppressed. It does all this with a compact size and reasonable weight. Even if you aren't running a semi-auto or select-fire rifle, the Ventum is still a great option. Sounding great at the muzzle has been a difficult task for many low-backpressure suppressors. The Ventum manages to sound fantastic at both ends, making it exceptionally balanced for most modern firearms.
It's designed for professional use, and as such is full-auto rated. If you do manage to destroy the Ventum, repair is quick and easy. The 3-D printed core can be easily removed and replaced while maintaining the original serial number on the outer tube. Many shooters will also welcome the HUB/Bravo/Omega thread pattern, allowing for nearly any mounting system to be utilized. The included 5/8x24 direct thread mount can be removed in seconds and replaced with numerous quick disconnect options or alternative thread pitches.
The community asked and Huxwrx listened.
FEATURES
- Flow-through design (no backpressure)
- 3D printed
- Titanium core, Stainless housing
- Black Nitride QPQ coating
- Full-auto rated
- Compatible with HUB/Bravo/Omega mounts
- +/- 4% bolt velocity
WHAT'S INCLUDED
- Silencer
- Instructions
- 5/8x24 direct thread mount
- Suppressor multitool
COMPATIBLE ACCESSORIES